1.0 – 1.5HP
from RM280. The standard bedroom or small office unit. Same-day completion, usually under 3 hours.
Aircon Installation
New unit, replacement or relocation — installed to manufacturer spec with a proper vacuum test, not a shortcut purge.
from RM280 per unit
What a proper install includes
- Copper piping (up to 10 ft included), insulation and trunking
- Dedicated wiring point check and breaker sizing advice
- Heavy-duty powder-coated wall bracket for the condenser
- Full vacuum pull-down before releasing refrigerant — no air purging
- Commissioning with supply-air temperature reading shown to you
- 12-month installation workmanship warranty on top of the brand warranty
Typical installation pricing
Install-only labour for wall-mounted inverter units. Supply-and-install packages quoted per brand and model — ask us for current stock pricing.
2.0 – 2.5HP
from RM380. Living rooms and open kitchens. Includes upgraded piping and bracket load check.
Ceiling cassette
from RM650. Offices and shoplots. Includes ceiling opening coordination and condensate pump if needed.
Relocation
from RM320. Careful pump-down, recovery of refrigerant, and reinstallation at the new spot with fresh flare joints.
Why the vacuum test matters
Plenty of quick installers still purge lines with refrigerant instead of pulling a vacuum. It looks fine on day one — then moisture in the lines slowly corrodes the compressor from inside. Every CoreKit installation gets a vacuum pull-down to below 500 microns, held and verified, before the service valves open. It adds half an hour to the job and years to your unit.
Planning a new unit?
Send us the room size and we’ll recommend the right horsepower — no oversized units, no underpowered regrets.
Get installation advice